HomedatasheetDG9262

DG9262 Datasheet

Low Voltage Dual SPST Analog Switch
Share:
Manufacturer

Description

Features, Applications

FEATURES

Low Voltage Operation +5 V) Low On-Resistance - rDS(on): 40 W Fast Switching - tON : 35 ns, tOFF: 20 ns Low Leakage - ICOM(on): 200-pA max Low Charge Injection - QINJ: 1 pC Low Power Consumption TTL/CMOS Compatible ESD Protection 2000 V (Method 3015.7) Available in MSOP-8 and SOIC-8

Reduced Power Consumption Simple Logic Interface High Accuracy Reduce Board Space
APPLICATIONS

Battery Operated Systems Portable Test Equipment Sample and Hold Circuits Cellular Phones Communication Systems Military Radio PBX, PABX Guidance and Control Systems

DESCRIPTION

The is a single-pole/single-throw monolithic CMOS analog device designed for high performance switching of analog signals. Combining low power, high speed (tON: 35 ns, tOFF: 20 ns), low on-resistance (rDS(on): 40 W) and small physical size, the DG9262/9263 is ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG9262/9263 is built on Vishay Siliconix's low voltage BCD-15 process. Minimum ESD protection, per Method V. An epitaxial layer prevents latchup. Break-before -make is guaranteed for DG9262/9263. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off.

Reference to GND V+. +13 V IN, COM, NC, NOa. -0.3 to (V+ 0.3 V) Continuous Current (Any terminal). "20 mA Peak Current. "40 mA (Pulsed 1ms, 10% duty cycle) ESD (Method 2000 V Storage Temperature (D Suffix). to 125�C Power Dissipation (Packages)b 8-Pin Narrow Body SOICc. 400 mW Notes: a. Signals on SX, DX, or INX exceeding or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6.5 mW/_C above 75_C

Test Conditions Otherwise Unless Specified Parameter Analog Switch

Analog Signal Ranged Drain-Source On-Resistance rDS(on) Matchd rDS(on) Flatnessd VANALOG rDS(on) DrDS(on) rDS(on) Flatness INO/NC(off) ICOM(off) ICOM(on) VNO or VNC 2.7 V ICOM 5 mA VNO or VNC 1.5 V VNO or VNC = 1 and 2 V VNO or VNC V, VCOM V, VNO or VNC VCOM = VNO or VNC Full Room Full Room Full Room Full Room Full W V

or NC Off Leakage Currentg COM Off Leakage Currentg Channel-On Leakage Currentg

Turn-On Time Turn-Off Time Charge Injectiond Off-Isolation Crosstalk NC and NO Capacitance Channel-On Capacitance Com-Off Capacitance tON VNO or VNC 1.5 V tOFF QINJ OIRR XTALK C(off) CCOM(on) CCOM(off) = 1 MHz = 1 nF, VGEN 0 V, RGEN = 5 pF, = 1 MHz Room Full Room Full Room dB ns

Power Supply Range Power Supply Current Notes: f. g. Room = 25�C, Full = as determined by the operating suffix. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. Typical values are for design aid only, not guaranteed nor subject to production testing. Guarantee by design, nor subjected to production test. VIN = input voltage to perform proper function. Difference of min and max values. Guaranteed by 5-V leakage test, not production tested. Document Number: 3.3 V, VIN V mA

Analog Signal Ranged Drain-Source On-Resistance rDS(on) Matchd rDS(on) Flatnessf VANALOG rDS(on) DrDS(on) rDS(on) Flatness INO/NC(off) ICOM(off) ICOM(on) VNO or VNC 4.5 V ICOM 5 mA VNO or VNC 3.5 V VNO or VNC 1, 2, and 3 V VNO or VNC V, VCOM V, VNO or VNC VCOM = VNO or VNC Full Room Full Room Full Room Full Room Full

or NC Off Leakage Current COM Off Leakage Current Channel-On Leakage Current

Turn-On Time Turn-Off Time Charge Injectiond Off-Isolation Crosstalk NC and NO Capacitance Channel-On Capacitance Com-Off Capacitance tON VNO or VNC 3.0 V tOFF QINJ OIRR XTALK C(off) CD(on) CD(off) = 1 MHz = 1 nF, VGEN 0 V, RGEN = 5 pF, = 1 MHz Room Full Room Full Room dB ns

Power Supply Range Power Supply Current 5.5 V, VIN V mA

Notes: e. f. Room = 25�C, Full = as determined by the operating suffix. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. Typical values are for design aid only, not guaranteed nor subject to production testing. Guarantee by design, nor subjected to production test. VIN = input voltage to perform proper function. Difference of min and max values.


Features

Parameters

Download DataSheet PDF View and Download


Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227