HomedatasheetDS3695ATMX/NOPB

DS3695ATMX/NOPB Datasheet

RS-422/RS-485 Interface IC
Share:
Manufacturer

Description

The DS3695ATMX/NOPB is high speed differential TRI-STATE bus/line transceivers/repeaters designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to -7V), for multipoint data transmission. The driver and receiver outputs feature TRI-STATE capability. The driver outputs remain in TRI-STATE over the entire common mode range of +12V to -7V. Bus faults that cause excessive power dissipation within the device trigger a thermal shutdown circuit, which forces the driver outputs into the high impedance state. The DS3696 provides an output pin TS (thermal shutdown) which reports the occurrence of the thermal shutdown of the device. This is an "open collector" pin with an internal 10 kQ pull-up resistor. This allows the line fault outputs of several devices to be wire OR-ed. Both AC and DC specifications are specified over the 0℃ to 70℃ temperature and 4.75V to 5.25V supply voltage range. DS3695ATMX/NOPB Features • Meets EIA standard RS485 for Multipoint Bus Transmission and is Compatible with RS-422• 15 ns Driver Propagation Delays with 2 ns Skew (Typical)• Single +5V supply• -7V to +12V Bus Common Mode Range Permits 17V Ground Difference Between Devices on the Bus• Thermal Shutdown Protection• High Impedance to Bus with Driver in TRI- STATE or with Power Off, Over the Entire Common Mode Range Allows the Unused Devices on the Bus to be Powered Down• Combined Impedance of a Driver Output and Receiver Input is Less than one RS485 Unit Load, Allowing up to 32 Transceivers on the Bus• 70 mV Typical Receiver Hysteresis
Features

Parameters

[{"Name":"Data Rate","Value":"10 Mbps"},{"Name":"Operating Supply Voltage","Value":"5 V"},{"Name":"Supply Current","Value":"60 mA"},{"Name":"Operating Temperature Range","Value":"+ 85 C"},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""}]

Manufacturer information

SEIKO INSTRUMENTS

Seiko Instruments Inc. Is a Japanese company which head office is located in 8, Nakase 1-chome, Mihama-ku, Chiba-shi, Chiba 261-8507, Japan . It’s business lines are: Watches Business Watches, Watch Movements Electronic Components Business Quartz crystals, Micro batteries, etc. Precision Mechatronics Business Inkjet printer heads, Hard disk components, Thermal printers, Compact precision components, Machine tools, FA, Musical instrument accessories, Radiation detection and measurement systems, etc.


Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227