HomedatasheetPCA9515D

PCA9515D Datasheet

Interface - Signal Buffers, Repeaters, Splitters
Share:
Manufacturer

Description

The PCA9515D is a BiCMOS integrated circuit intended for application in I2C-bus andSMBus systems.While retaining all the operating modes and features of the I2C-bus system, it permitsextension of the I2C-bus by buffering both the data (SDAn) and the clock (SCLn) lines,thus enabling two buses of 400 pF.The I2C-bus capacitance limit of 400 pF restricts the number of devices and bus length.Using the PCA9515 enables the system designer to isolate two halves of a bus, thus moredevices or longer length can be accommodated. It can also be used to run two buses, oneat 5 V and the other at 3.3 V or a 400 kHz and 100 kHz bus, where the 100 kHz bus isisolated when 400 kHz operation of the other is required.Two or more PCA9515s cannot be put in series. The PCA9515 design does not allowthis configuration. Since there is no direction pin, slightly different &lsquo;legal&rsquo; low voltage levelsare used to avoid lock-up conditions between the input and the output. A &lsquo;regular low&rsquo;applied at the input of a PCA9515 will be propagated as a &lsquo;buffered low&rsquo; with a slightlyhigher value. When this &lsquo;buffered low&rsquo; is applied to another PCA9515, PCA9516A, orPCA9518A in series, the second PCA9515, PCA9516A, or PCA9518A will not recognizeit as a &lsquo;regular low&rsquo; and will not propagate it as a &lsquo;buffered low&rsquo; again. ThePCA9510A/9511A/9513A/9514A and PCA9512A cannot be used in series with thePCA9515, PCA9516A, or PCA9518A but can be used in series with themselves sincethey use shifting instead of static offsets to avoid lock-up conditions.The PCA9515 SCLn/SDAn Ci is about 200 pF versus the normal < 10 pF when VCC = 0 V.The newer PCA9515A should be used in applications where power is secured to therepeater but an active bus remains on either set of SCLn/SDAn pins to prevent thisincrease in bus loading. Additionally, the PCA9515A has a wider voltage range of 2.3 V to3.6 V and can be used in applications with lower voltage supply constraints. PCA9515D Features &bull; 2 channel, bidirectional buffer&bull; I2C-bus and SMBus compatible&bull; Active HIGH repeater enable input&bull; Open-drain input/outputs&bull; Lock-up free operation&bull; Supports arbitration and clock stretching across the repeater&bull; Accommodates Standard-mode and Fast-mode I2C-bus devices and multiple masters&bull; Powered-off high-impedance I2C-bus pins&bull; Operating supply voltage range of 3.0 V to 3.6 V&bull; 5.5 V tolerant I2C-bus (SCLn, SDAn) and enable (EN) pins&bull; 0 Hz to 400 kHz clock frequency1&bull; ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM perJESD22-A115, and 1000 V CDM per JESD22-C101&bull; Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA&bull; Packages offered: SO8 and TSSOP8 (MSOP8)
Features

Parameters

[{"Name":"Delay Time","Value":"55ns"},{"Name":"Capacitance - Input","Value":"6pF"},{"Name":"Voltage - Supply","Value":"3 V ~ 3.6 V"},{"Name":"Current - Supply","Value":"2.3mA"},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""}]

Manufacturer information

SEME-LAB [SEME LAB]
Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227