HomedatasheetSG3525ADW

SG3525ADW Datasheet

Voltage Mode PWM Controllers
Share:
Manufacturer

Description

The SG3525ADW pulse width modulator control circuit offers improved performance and lower external parts count when implemented for controlling all types of switching power supplies. The on−chip +5.1 V reference is trimmed to 1% and the error amplifier has an input common−mode voltage range that includes the reference voltage, thus eliminating the need for external divider resistors. A sync input to the oscillator enables multiple units to be slaved or a single unit to be synchronized to an external system clock. A wide range of deadtime can be programmed by a single resistor connected between the CT and Discharge pins. This device also features built−in soft−start circuitry, requiring only an external timing capacitor. A shutdown pin controls both the soft−start circuitry and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft−start recycle with longer shutdown commands. The under voltage lockout inhibits the outputs and the changing of the soft−start capacitor when VCC is below nominal. The output stages are totem−pole design capable of sinking and sourcing in excess of 200 mA. The output stage of the SG3525ADW features NOR logic resulting in a low output for an off−state. SG3525ADW Features • 8.0 V to 35 V Operation• 5.1 V 1.0% Trimmed Reference• 100 Hz to 400 kHz Oscillator Range• Separate Oscillator Sync Pin• Adjustable Deadtime Control• Input Undervoltage Lockout• Latching PWM to Prevent Multiple Pulses• Pulse−by−Pulse Shutdown• Dual Source/Sink Outputs: 400 mA Peak• Pb−Free Packages are Available
Features

Parameters

[{"Name":"Number of Outputs:","Value":"2"},{"Name":"Output Current:","Value":"400 mA"},{"Name":"Switching Frequency:","Value":"400 kHz"},{"Name":"Maximum Operating Temperature:","Value":"+ 70 C"},{"Name":"Minimum Operating Temperature:","Value":"0 C"},{"Name":"Fall Time:","Value":"50 ns"},{"Name":"Rise Time:","Value":"100 ns"},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""}]

Manufacturer information

SEIKO INSTRUMENTS

Seiko Instruments Inc. Is a Japanese company which head office is located in 8, Nakase 1-chome, Mihama-ku, Chiba-shi, Chiba 261-8507, Japan . It’s business lines are: Watches Business Watches, Watch Movements Electronic Components Business Quartz crystals, Micro batteries, etc. Precision Mechatronics Business Inkjet printer heads, Hard disk components, Thermal printers, Compact precision components, Machine tools, FA, Musical instrument accessories, Radiation detection and measurement systems, etc.


Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us

+86-755-83536845

One to One Customer Service

17190417227