SN74LVTH16245ADGGR Datasheet

Bus Transceivers


The SN74LVTH16245ADGGR devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. The devices are designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldownresistors with the bus-hold circuitry is not recommended.When VCC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down.However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor the minimum value of the resistor is determined by the current-sinking capability of the driver.These devices are fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitrydisables the outputs, preventing damaging current backflow through the devices when they are powered down.The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,which prevents driver conflict. SN74LVTH16245ADGGR Features &bull; Members of the Texas Instruments Widebus&trade;Family&bull; State-of-the-Art Advanced BiCMOS Technology (ABT) Design for 3.3-V Operation and Low Static-Power Dissipation&bull; Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)&bull; Support Unregulated Battery Operation Down to 2.7 V&bull; Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25&deg;C&bull; Distributed VCC and GND Pins Minimize High-Speed Switching Noise&bull; Flow-Through Architecture Optimizes PCB Layout&bull; Ioff and Power-Up 3-State Support Hot Insertion&bull; Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors&bull; Latch-Up Performance Exceeds 500 mA Per JESD 17&bull; ESD Protection Exceeds JESD 22&ndash; 2000-V Human-Body Model (A114-A)&ndash; 200-V Machine Model (A115-A)


[{"Name":"High Level Output Current","Value":"- 32 mA"},{"Name":"Low Level Output Current","Value":"64 mA"},{"Name":"Propagation Delay Time","Value":"4.1 ns"},{"Name":"Supply Voltage - Max","Value":"3.6 V"},{"Name":"Supply Voltage - Min","Value":"2.7 V"},{"Name":"Maximum Operating Temperature","Value":"+ 85 C"},{"Name":"Minimum Operating Temperature","Value":"- 40 C"},{"Name":"","Value":""},{"Name":"","Value":""},{"Name":"","Value":""}]

Manufacturer information

Warm Hint

What HQEW.NET can offer here?
1. www.hqew.net/product-data provides numerous and various electronic part data-sheet and technology document here., if it can't be shown, Please feel free to ask us for it.
2. www.hqew.net/news provides the latest information of the semiconductor industry or the electronics industry for you.
3. www.hqew.net provides verified suppliers and numerous electronic components for your demand and business.
Any questions you can contact us by email cs@hqew.net.
Request for Datasheet

  • Part No     :
  • Your Email:
  • Content     :

related datasheet
Browse Alphabetically: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
Contact Us


One to One Customer Service